What Our Customers Are Saying
FAQs
It shields your jug and countertop dispenser from dust, light splashes, and sunlight, helping keep water clean between pours.
It’s sized for standard 2.5-gallon glass jugs and their countertop dispensers and is specifically tall enough to cover the full Jug & Dispenser Combo (jug + dispenser together).
The cover height matches the Jug & Dispenser Combo set so it can fully enclose both pieces at once (including typical lid/spigot clearance).
No—cover only. Jugs and dispensers are sold separately unless explicitly stated.
Durable, low-maintenance fabric (commonly polyester or a cotton blend). The interior is smooth to avoid scuffing glass.
It’s not waterproof and not an insulator. It provides light splash protection and shade; it won’t keep beverages hot/cold.
Yes—lift the front edge or align the spigot opening (if your cover includes one) so the spout clears the edge for easy pouring.
Typically with an elastic hem or drawstring at the base for a snug fit. Adjust so it sits level and doesn’t obstruct the spigot.
Covers can slow airflow slightly. Wipe any drips before covering and occasionally air out the jug/dispenser to prevent moisture buildup.
Spot-clean with mild soap and water; air-dry fully. If machine-washable, use a gentle cycle and cool water; avoid bleach and high heat.
Keep away from hot appliances, open flames, and direct heating vents.
The fabric is soft; avoid trapped grit. Wipe the jug/dispenser before covering to prevent abrasion from dust.
Yes—ensure the cover doesn’t snag and the spigot clears the shelf edge for pouring. Keep the unit stable and level.
Often yes. Route the pump spout over the cover edge or through an opening; avoid pinching tubing and keep the motor unit dry.
If you’re not using the full Combo, measure your setup’s overall height (including lid/pump) and width. Choose a cover with a little extra room for easy on/off.
Varies by seller. Inspect on arrival and contact support promptly if anything is damaged or missing.





